XVS-430-10MPI or XVS-430-12MPI or XVS-440-10MPI or XVS-440-12MPI or MS2-430-10MPI or MS2-430-12MPI or MS2-440-10MPI or MS2-440-12MPI Requirements for the place of installation Approvals: The device must only be used in locations that are approved for the device. See the markings on the nameplate and Chapter 9 Technical data, 55. Power supply: The power supply must comply with the requirements stated in Chapter 9.5.1 Power supply, 60. 5.2.1 Engineering conditions of acceptability by Underwriters Labaratories Inc. (UL) The device must be installed in an end-product. For the approval in accordance with the standard UL 60950, consideration must be given to the following: The environment of the device must comply with pollution degree 2. The device must be supplied via a SELV source. The device must be connected to the protective earth of the end-product (the functional earthing connection of the power supply interface must be connected). In order to protect the device from potential internet threats,
it should be connected to Ethernet networks that are isolated from the internet or safety protected and isolated from the Corporate/Enterprise network by a firewall or router. Fire protection and electrical protection must be ensured via the end-product (not required for the front of the device). 5.2.2 Requirements for the mounting position The device is designed for mounting in control cabinets, control panels or control desks. 10.4″ and 12.1″ devices can be mounted horizontally or vertically, 15″ devices must only be mounted horizontally. The following requirements must be fulfilled when selecting a suitable mounting position: The device should not be exposed to direct sunlight (Sunlight disturbs the infra-red touch sensor. In addition, when exposed to UV light, plastic parts of the device can embrittle and the lifespan of the device is reduced). If the device is to be used in potentially explosive atmospheres, the device must not be subjected to hazardous knocks. The operating elements on the service side of the device and the cable connections are accessible after the device has been mounted. The ambient conditions stated must be observed. See Chapter 9.9 Ambient conditions, 62. Sufficient ventilation (cooling) must be ensured by means of:
Clearance of at least 3 cm to the ventilation slots Clearance of at least 15 cm from heat radiating components such as heavily loaded transformers The expected temperatures should be within the permissible range. See Chapter 9.9 Ambient conditions, 62. Properties of the mounting surfaces: Material thickness at the mounting cutout 2…5 mm Flatness 0.5 mm (this requirement must also be fulfilled when the device is mounted!) Surface roughness Rz 1201 Strip the cable end so that approx. 3 cm of the shield braid is exposed. 2 Fold back the shield braid over the cable shield. 3 Fit approx. 3 cm of heat shrinkable tubing over the folded back end of the shield braid or use a rubber grommet. 5…8 mm of the shield braid must be exposed at the cable end. The folded back shield braid end must be covered by the heat shrinkable tubing or by the rubber grommet. 4 Fit the D-Sub connector to the cable end: The exposed metal shield braid must be clamped to the connector casing with the cable clamp.Additional product information (links) IL04802011Z Enclosed kit information IL04802011Z Enclosed kit information ftp://ftp.moeller.net/DOCUMENTATION/AWA_INSTRUCTIONS/IL04802011Z2018_02.pdf MN04802011Z Operator manual XVS400 5.7″/8.4″ MN04802011Z Bedienerhandbuch XVS400 5,7″/8,4″ – Deutsch ftp://ftp.moeller.net/DOCUMENTATION/AWB_MANUALS/MN04802011Z_DE.pdf MN04802011Z Operator manual XVS400 5.7″/8.4″ – English ftp://ftp.moeller.net/DOCUMENTATION/AWB_MANUALS/MN04802011Z_EN.pdf MN04802093Z XSoft-CoDeSys-2, PLC programming XVS400 MN04802093Z XSoft-CoDeSys-2, SPSProgrammierung XVS400 – Deutsch ftp://ftp.moeller.net/DOCUMENTATION/AWB_MANUALS/MN04802094Z-DE.pdf MN04802093Z XSoft-CoDeSys-2, SPSProgrammierung XVS400 – Deutsch ftp://ftp.moeller.net/DOCUMENTATION/AWB_MANUALS/MN04802094Z_DE.pdf MN04802093Z XSoft-CoDeSys-2, PLC programming XVS400 – English ftp://ftp.moeller.net/DOCUMENTATION/AWB_MANUALS/MN04802094Z-EN.pdf MN04802093Z XSoft-CoDeSys-2, PLC programming XVS400 – English ftp://ftp.moeller.net/DOCUMENTATION/AWB_MANUALS/MN04802094Z_EN.pdf MN048008ZU Manual XSOFT-CODESYS-3, PLC programming MN048008ZU Handbuch XSOFT-CODESYS-3, Model recommendation:
**Core Identity:** A high-end HMI (Human Machine Interface) device within Eaton’s industrial automation product line, belonging to the XVS series. Designed specifically for industrial control systems, it supports equipment status monitoring, parameter configuration, and remote operation. It shares a modular architecture with the XV-440 and XVM series, and is compatible with PLCs, frequency converters, and sensors.
**Model Related:** Models in the same series include XVS-440-12MPI-1-10 and XVS-460-15MPI-1-10, supporting size expansion (10.4 inches to 15 inches) and function customization (such as capacitive/resistive touch, multi-protocol communication).
**Hardware Design:**
**Display Specifications:** 3.5-inch TFT color touchscreen (320×240 pixels resolution), supporting capacitive/resistive touch, adaptable to industrial operating environments.
**Interface Configuration:** Integrated Ethernet (100base-TX), RS485, and USB host/device interfaces, compatible with Modbus TCP/RTU, CANopen, and other protocols. Protection Rating: IP20/IP65 (dust and splash resistant front panel), operating temperature range 0°C to +50°C, dimensions 136×100×30mm, weight approx. 2.8kg.
Power Supply and Performance: 24V DC power supply, 400MHz processor, 125KB NVRAM, 64MB DRAM, and 64MB NAND flash memory, power consumption approx. 22W.
Core Functions and Technical Features
Display and Touch Capabilities
Screen Specifications: 10.4-inch TFT color display (800×600 resolution or higher), supports capacitive/resistive touch, some models are compatible with multi-touch, suitable for industrial glove operation.
Protection Design: IP65 protection rating for the front panel, dust and water resistant, impact resistant, operating temperature range -40°C to 100°C, suitable for extreme industrial environments (such as high temperature, high humidity, dust).
Technical Highlights and Functions
Control Capabilities: Integrated 32-bit DSP digital control, supporting position/speed/cycle control modes, overload capacity up to 3 times, response frequency 4MPPS, compatible with servo motor encoders (20-bit/17-bit resolution).
Expandability: Supports multi-axis control systems (via DBUS bus), compatible with customized PLC functions (such as Siemens and Rockwell systems), and can load operating systems and licenses via CompactFlash card.
Environmental Adaptability: Suitable for harsh industrial environments (dustproof, shockproof, wide temperature range), flexible installation methods (panel-mounted, wall-mounted, or DIN rail mounting), 15-inch version requires horizontal installation.
Communication and Expandability
Interface Configuration: Integrated Ethernet (100Base-TX), RS232/RS485, USB host/device interface, supports Modbus TCP/RTU, Profibus, CAN bus protocols, compatible with industrial Ethernet and wireless communication (e.g., 4G/5G modules optional).
System Compatibility: Supports Windows CE, Linux, and Eaton’s proprietary platforms. Programmable via software platforms such as Galileo and CoDeSys, enabling seamless integration with PLCs, drives, sensors, and other devices.
Expansion Capabilities: Supports SD card/USB storage expansion, up to 2GB of RAM, and 8GB of Flash storage, meeting data logging and program update needs.
Hardware and Performance:
Processor: Employs an ARM Cortex A9 800MHz or Intel high-performance processor, ensuring fast response and multitasking.
Power Supply Design: 24V DC power supply with a built-in power management module. Some models support redundant power supply configurations to ensure system stability.
Installation Methods: Supports panel-mounted, DIN rail, or wall-mounted installations, adaptable to various scenarios such as control cabinets and consoles.
Intelligent Features and Compliance:
Remote Monitoring: Enables remote access and diagnostics via Ethernet or VPN, supporting WebVisu functionality for mobile devices (such as tablets and phones).
Safety Certifications: Complies with international standards such as DNV-GL marine certification, CE, and UL. Some models have passed explosion-proof and corrosion-resistant certifications, suitable for high-risk environments such as petroleum and chemical industries.
Application Scenarios and Value
Typical Applications:
Industrial Automation: Production line monitoring (e.g., automobile assembly, food packaging), equipment parameter setting (e.g., motor start/stop, speed regulation), alarm management, and process flow visualization.
Energy Management: Power monitoring, energy consumption analysis, equipment operating status tracking, suitable for power plants, substations, and building automation systems.
Special Industries: Equipment control and status monitoring in offshore platforms, explosion-proof areas, and high/low temperature environments (e.g., steel mills, mines, oil and gas fields).
Performance Advantages: High reliability, strong anti-interference capability, multi-protocol compatibility, modular design reduces maintenance costs and improves overall system efficiency.
Detailed Technical Parameters
Electrical Parameters: 24V DC power supply, power consumption ≤50W, supports wide operating temperature (-40℃ to 100℃), storage temperature -30℃ to 80℃.
Display parameters: 10.4-inch display, 800×600 resolution (some models support 1280×800), brightness ≥400cd/m², contrast ratio ≥1000:1.
Communication parameters: Ethernet speed 100Mbps, RS485 baud rate up to 115.2kbps, supports Modbus master/slave mode.
Mechanical parameters: Dimensions approximately 280×220×50mm (varies by model), weight ≤3kg, installation depth ≤150mm.
Summary
The EATON XVS-440-10MPI-1-1U is an intelligent touchscreen designed specifically for industrial automation. It integrates high-precision control, multi-protocol communication, modular expansion, and environmental adaptability, making it suitable for complex control systems in industries such as oil and gas, power, metallurgy, and shipbuilding. Its reliable performance, flexible installation methods, and broad compatibility make it a core component of industrial HMI solutions.
admin –
Product Positioning and Series Affiliation
**Core Identity:** A high-end HMI (Human Machine Interface) device within Eaton’s industrial automation product line, belonging to the XVS series. Designed specifically for industrial control systems, it supports equipment status monitoring, parameter configuration, and remote operation. It shares a modular architecture with the XV-440 and XVM series, and is compatible with PLCs, frequency converters, and sensors.
**Model Related:** Models in the same series include XVS-440-12MPI-1-10 and XVS-460-15MPI-1-10, supporting size expansion (10.4 inches to 15 inches) and function customization (such as capacitive/resistive touch, multi-protocol communication).
**Hardware Design:**
**Display Specifications:** 3.5-inch TFT color touchscreen (320×240 pixels resolution), supporting capacitive/resistive touch, adaptable to industrial operating environments.
**Interface Configuration:** Integrated Ethernet (100base-TX), RS485, and USB host/device interfaces, compatible with Modbus TCP/RTU, CANopen, and other protocols. Protection Rating: IP20/IP65 (dust and splash resistant front panel), operating temperature range 0°C to +50°C, dimensions 136×100×30mm, weight approx. 2.8kg.
Power Supply and Performance: 24V DC power supply, 400MHz processor, 125KB NVRAM, 64MB DRAM, and 64MB NAND flash memory, power consumption approx. 22W.
Core Functions and Technical Features
Display and Touch Capabilities
Screen Specifications: 10.4-inch TFT color display (800×600 resolution or higher), supports capacitive/resistive touch, some models are compatible with multi-touch, suitable for industrial glove operation.
Protection Design: IP65 protection rating for the front panel, dust and water resistant, impact resistant, operating temperature range -40°C to 100°C, suitable for extreme industrial environments (such as high temperature, high humidity, dust).
Technical Highlights and Functions
Control Capabilities: Integrated 32-bit DSP digital control, supporting position/speed/cycle control modes, overload capacity up to 3 times, response frequency 4MPPS, compatible with servo motor encoders (20-bit/17-bit resolution).
Expandability: Supports multi-axis control systems (via DBUS bus), compatible with customized PLC functions (such as Siemens and Rockwell systems), and can load operating systems and licenses via CompactFlash card.
Environmental Adaptability: Suitable for harsh industrial environments (dustproof, shockproof, wide temperature range), flexible installation methods (panel-mounted, wall-mounted, or DIN rail mounting), 15-inch version requires horizontal installation.
Communication and Expandability
Interface Configuration: Integrated Ethernet (100Base-TX), RS232/RS485, USB host/device interface, supports Modbus TCP/RTU, Profibus, CAN bus protocols, compatible with industrial Ethernet and wireless communication (e.g., 4G/5G modules optional).
System Compatibility: Supports Windows CE, Linux, and Eaton’s proprietary platforms. Programmable via software platforms such as Galileo and CoDeSys, enabling seamless integration with PLCs, drives, sensors, and other devices.
Expansion Capabilities: Supports SD card/USB storage expansion, up to 2GB of RAM, and 8GB of Flash storage, meeting data logging and program update needs.
Hardware and Performance:
Processor: Employs an ARM Cortex A9 800MHz or Intel high-performance processor, ensuring fast response and multitasking.
Power Supply Design: 24V DC power supply with a built-in power management module. Some models support redundant power supply configurations to ensure system stability.
Installation Methods: Supports panel-mounted, DIN rail, or wall-mounted installations, adaptable to various scenarios such as control cabinets and consoles.
Intelligent Features and Compliance:
Remote Monitoring: Enables remote access and diagnostics via Ethernet or VPN, supporting WebVisu functionality for mobile devices (such as tablets and phones).
Safety Certifications: Complies with international standards such as DNV-GL marine certification, CE, and UL. Some models have passed explosion-proof and corrosion-resistant certifications, suitable for high-risk environments such as petroleum and chemical industries.
Application Scenarios and Value
Typical Applications:
Industrial Automation: Production line monitoring (e.g., automobile assembly, food packaging), equipment parameter setting (e.g., motor start/stop, speed regulation), alarm management, and process flow visualization.
Energy Management: Power monitoring, energy consumption analysis, equipment operating status tracking, suitable for power plants, substations, and building automation systems.
Special Industries: Equipment control and status monitoring in offshore platforms, explosion-proof areas, and high/low temperature environments (e.g., steel mills, mines, oil and gas fields).
Performance Advantages: High reliability, strong anti-interference capability, multi-protocol compatibility, modular design reduces maintenance costs and improves overall system efficiency.
Detailed Technical Parameters
Electrical Parameters: 24V DC power supply, power consumption ≤50W, supports wide operating temperature (-40℃ to 100℃), storage temperature -30℃ to 80℃.
Display parameters: 10.4-inch display, 800×600 resolution (some models support 1280×800), brightness ≥400cd/m², contrast ratio ≥1000:1.
Communication parameters: Ethernet speed 100Mbps, RS485 baud rate up to 115.2kbps, supports Modbus master/slave mode.
Mechanical parameters: Dimensions approximately 280×220×50mm (varies by model), weight ≤3kg, installation depth ≤150mm.
Summary
The EATON XVS-440-10MPI-1-1U is an intelligent touchscreen designed specifically for industrial automation. It integrates high-precision control, multi-protocol communication, modular expansion, and environmental adaptability, making it suitable for complex control systems in industries such as oil and gas, power, metallurgy, and shipbuilding. Its reliable performance, flexible installation methods, and broad compatibility make it a core component of industrial HMI solutions.
https://www.weikunfadacai1.com/product/eaton-xvs-440-10mpi-1-1u/