Description
Many products are not yet on the shelves. Please contact us for more products.
If the product model is inconsistent with the display picture, the model shall prevail. Please contact us for specific product pictures, and we will arrange to take photos in the warehouse for confirmation.
We have 76 shared warehouses around the world, so sometimes it may take several hours to return to you accurately, please understand. Of course, we will respond to your concerns as soon as possible.
GBU72 3BHE055094R0002 3BHE031197R0001 3BHB030310R0001 PCS6000 Other names:
Grid breaker unit PCS6000 GBU72 3BHE055094R0002 3BHE031197R0001 3BHB030310R0001
GBU72 3BHE055094R0002 3BHE031197R0001 3BHB030310R0001 PCS6000 grid breaker unit
Inverter PCS6000 GBU72 3BHE055094R0002 3BHE031197R0001 3BHB030310R0001
ABB PCS6000 full power converter GBU72 3BHE055094R0002 3BHE031197R0001 3BHB030310R0001 is a high-performance power electronic device designed by ABB Group for renewable energy power generation (such as wind power generation, photovoltaic power generation) and energy storage systems, with high efficiency, high reliability and intelligent control capabilities.
Product Overview
Definition and Positioning
PCS6000: Full power converter (Power Conversion System), used to convert direct current generated by renewable energy (such as wind power, photovoltaic power generation) into alternating current, or to achieve two-way energy exchange between energy storage systems and power grids. Applicable to megawatt-level high-power scenarios, emphasizing high reliability, high efficiency and grid compatibility.
Core application scenarios
Wind power generation: connect wind turbines to the grid to achieve maximum power point tracking (MPPT) and low voltage ride-through (LVRT).
Photovoltaic power generation: adapt to large photovoltaic power stations, support centralized or string inverter solutions.
Energy storage system: as the core equipment of the battery energy storage system (BESS), it realizes charging and discharging control and grid peak and frequency regulation.
Microgrid: coordinates the energy management of distributed power sources and loads in off-grid or grid-connected mode.
Onshore/offshore wind farms: as the interface between wind turbines and the grid, improve wind energy utilization and grid stability.
Photovoltaic power station: used for centralized photovoltaic inverters to achieve maximum power point tracking (MPPT) and grid-connected control.
Energy storage system: combined with battery energy storage, it realizes peak shaving, frequency regulation, backup power supply and other functions to enhance grid flexibility.
Microgrid and distributed energy: support multi-energy complementarity (such as wind, solar and storage integration) to achieve autonomous operation of local power grids.
Technical specifications and performance parameters
Power level
Typical power range: 1MW-10MW
Support parallel expansion to meet the needs of large power stations.
Electrical parameters
Input side (DC):
Voltage range: 600V-1500V DC (adapt to different photovoltaic modules or wind power converter output).
Maximum input current: depends on the power level (such as 5MW models may support ≥3000A).
Output side (AC):
Voltage level: medium voltage (10kV/35kV) or low voltage (400V), matching grid access requirements.
Frequency: 50Hz/60Hz adaptive, supporting global grid standards.
Power factor: ≥0.99 (adjustable), meeting reactive power compensation requirements.
Total harmonic distortion (THD): <3%, in line with IEEE 519 standard.
Efficiency and reliability
Peak efficiency: ≥98.5% (European efficiency standard), reducing energy loss.
MTBF (mean time between failures): >100,000 hours, adapting to harsh environments (such as deserts and coastal areas).
Protection level****: IP54/IP65, dustproof and waterproof design, supporting outdoor installation.
Cooling method: liquid cooling or air cooling optional, adapting to high temperature/high altitude areas.
Core functions and technical features
Intelligent control algorithm
Maximum power point tracking (MPPT): dynamically adjust the working point to improve power generation efficiency (wind power/photovoltaic scenarios).
Low voltage ride-through (LVRT): keep connected to the grid when the grid fails to avoid power fluctuations caused by disconnection.
Power regulation: support active/reactive independent control, participate in grid frequency and voltage regulation services.
Black start capability: When the power grid is completely out of power, the energy storage system is used to restore power supply (microgrid application).
Modular design
Power module: IGBT/SiC devices are used, hot-swappable, and easy to maintain and expand.
Control unit: Distributed architecture and redundant design improve system availability.
Communication interface: Support IEC 61850, Modbus TCP, DNP3 and other protocols, integrated into SCADA or energy management system (EMS).
Power quality optimization: Improve grid stability and reduce harmonic pollution through active/reactive power control.
Grid-connected control: Support low voltage ride-through (LVRT), high voltage ride-through (HVRT) and other grid fault response capabilities.
Bidirectional energy flow: Applicable to energy storage systems to achieve flexible switching of charging/discharging modes.
Environmental adaptability: Designed to meet stringent industrial standards (such as IP54 protection level, vibration/shock resistance).
Full power conversion
Convert the AC power output by the generator (such as a wind turbine) into DC power, and then invert it into AC power that meets the requirements of the grid to achieve flexible connection with the grid.
Supports bidirectional power flow, suitable for grid-connected and off-grid modes.
Power quality control
Power factor correction and harmonic suppression are achieved through advanced control algorithms (such as vector control and direct torque control) to ensure that the output power meets grid standards (such as IEEE 1547, GB/T 19964).
Fault ride-through capability
With low voltage ride-through (LVRT) and high voltage ride-through (HVRT) functions, it maintains grid-connected operation when the grid voltage fluctuates and avoids disconnection.
Reactive power support
Dynamically adjust reactive power to improve grid stability, especially in weak grid environments.
Grid adaptability
Wide voltage/frequency range: adapt to grid fluctuations (such as voltage deviation ±15%, frequency deviation ±2Hz).
Harmonic suppression: built-in filter to reduce pollution to the grid.
Anti-islanding protection: Quickly disconnect after detecting power failure of the power grid to ensure personnel safety.
Installation and commissioning
Installation requirements
Mechanical installation:
Solid foundation, earthquake-resistant design (especially suitable for wind power scenarios).
The heat dissipation channel is unobstructed to avoid the risk of leakage in the liquid cooling system.
Electrical wiring:
DC side: positive and negative polarity are correct, and the insulation monitoring device (IMD) is connected.
AC side: grounding resistance meets the standard (such as ≤4Ω).
Debugging process
Function test:
Simulate power grid fault and verify LVRT function.
Check the power factor adjustment range (such as 0.8 leading to 0.8 lagging).
Performance optimization:
Adjust MPPT parameters to adapt to different light/wind speed conditions.
Optimize harmonic filter parameters to reduce THD.
Typical application cases
Offshore wind power projects
Scenario: A 500MW offshore wind farm
Solution: PCS6000 converter GBU72 3BHE055094R0002 3BHE031197R0001 3BHB030310R0001 is used to support 10MW wind turbines connected to the grid, with IP67 protection level and salt spray corrosion resistance.
Large photovoltaic power station
Scenario: 1GW photovoltaic base in Northwest China
Solution: PCS6000 centralized inverter, with 1500V DC system, reduces line loss and improves efficiency.
Grid-side energy storage
Scenario: Peak and frequency regulation auxiliary services
Solution: PCS6000 bidirectional converter + lithium battery energy storage system, response time <100ms, supports millisecond-level power regulation.
Maintenance and troubleshooting
Daily maintenance
Cleaning inspection: Clean the cooling fan/filter regularly to prevent dust accumulation.
Tightening inspection: Check whether the power module terminals are loose.
Software upgrade: Update the control algorithm through ABB special tools (such as PCM600).
Common faults and solutions
Fault code E01: DC overvoltage
Reason: PV module output is too high or brake resistor fails.
Solution: Check the number of modules in series and replace the brake resistor.
Fault code E05: AC side underfrequency
Reason: Low grid frequency or converter phase-locked loop (PLL) failure.
Solution: Verify grid frequency, restart converter and observe PLL status.
ABB PCS6000 full power converter GBU72 3BHE055094R0002 3BHE031197R0001 3BHB030310R0001 is the core equipment for renewable energy grid connection, characterized by high efficiency, high reliability and intelligent control. When selecting, focus on power/voltage matching, environmental adaptability and grid compatibility, and ensure long-term stable operation through regular maintenance.
All products on this website are special products, and the market price has been fluctuating.
The specific quotation is subject to the customer service. Because the product is a new product, the price is not real.
Please confirm the model and product, price and other detailed information with the customer service before placing an order. The website has been used.
New ones are on sale, please contact customer service for communication.
Related product recommendations:
S-093H 3BHB030478R0009
3BHB009884R0021 S-073N
3BHB009885R0052 S-097H
3BHB009885R0013 S-093M
ABB S-093H 3BHB030478R0309
ABB S-093S 3BHB030475R0009
S-093S 3BHB030475R0009
S-073N 3BHB009884R5211
S-073N 3BHB009884R0021 35SHY3545L0014
S-053M 3BHB012897R0003
S-073N 3BHB009884R0021 35SHY3545L0014
S-073N ABB 3BHB009884R0021
S-097H 3BHB009885R0052
S-093H 3BHB030478R0309
ABB 5SHY3545L0014 3BHB020720R0002
ABB 5SHY4045L0003
5SHY4045L0003 3BHE019719R0101
5SHY4045L0003 3BHB021400 3BHE019719R0101
5SHY3545L0005 336A4954ARP2
KUC321AE HIEE300698R1
KUC711AE 3BHB004661R0001
KUC720AE 3BHB000652R0001
GFD233A101 3BHE022294R0101
GFD563A102 3BHE046836R0102
GF D563 3BHE046836R010
3BHE017628R0002 PPD115A02
PPD517A3011 3BHE041576R3011
PCD232A 3BHE022293R0101
PCD237A101 3BHE028915R0101
PCD230A 3BHE022291R0101
PCD231B 3HHE025541R0101
PCD235C101 3BHE057901R0101
More……
admin –
ABB PCS6000 full power converter GBU72 3BHE055094R0002 3BHE031197R0001 3BHB030310R0001 is a high-performance power electronic device designed by ABB Group for renewable energy power generation (such as wind power generation, photovoltaic power generation) and energy storage systems, with high efficiency, high reliability and intelligent control capabilities.
Product Overview
Definition and Positioning
PCS6000: Full power converter (Power Conversion System), used to convert direct current generated by renewable energy (such as wind power, photovoltaic power generation) into alternating current, or to achieve two-way energy exchange between energy storage systems and power grids. Applicable to megawatt-level high-power scenarios, emphasizing high reliability, high efficiency and grid compatibility.
https://www.weikunfadacai1.com/product/abb-pcs6000-full-power-converter-gbu72-3bhe055094r0002-3bhe031197r0001-3bhb030310r0001/
Ann –
GBU72 3BHE05904R0002, 3BHE03197R0001, and 3BHB030310R0001 are all critical components in the ABB PCS6000 full power converter, responsible for circuit breaker control, power drive, and protection functions, jointly ensuring the safe and stable operation of the system in high-voltage power grid environments.
GBU72 3BHE05904R002: Core Control Unit
Functional positioning:
As the core control cabinet (GBU72 control cabinet) of the PCS6000 system, responsible for circuit breaker control, network side synchronization, communication coordination, and status management.
Circuit breaker control: realizing intelligent management of power grid input, including grid side circuit breaker closing/opening, power on sequence control, main circuit isolation and safety locking.
Synchronization and Protection: Supports grid synchronization detection, fault isolation, and system interlocking to ensure safe start stop and stable operation of equipment in high-voltage grid environments.
Communication coordination: Seamless integration with PMI (Power Interface Module), PEC (Power Electronic Controller), HMI (Human Machine Interface) and other modules through fiber optic interfaces, supporting communication protocols such as MODBUS.
Status management: Real time collection of system status data (such as voltage, current, temperature) to provide decision-making basis for operation and maintenance.
https://www.weikunfadacai1.com/product/abb-pcs6000-full-power-converter-gbu72-3bhe055094r0002-3bhe031197r0001-3bhb030310r0001/
Ann –
Surgical parameters:
Model: 3BHe059094R0002
System ownership: ABB PCS6000 medium voltage frequency converter system
Control voltage: 24V DC (logic control part)
Integrated functions: power input management, grid synchronization detection, circuit breaker drive control, system status acquisition
Cabinet structure: Industrial standard control cabinet, enclosed metal box, supporting cabinet installation
Cooling method: natural ventilation or forced air cooling (depending on system configuration)
Application scenarios: High voltage motor drive, wind power and energy storage systems, power grid protection and automation systems.
3BHE03197R0001: Power Drive and Protection Unit
Functional positioning:
As a gate control unit (GBU), it drives high-voltage power semiconductor devices (such as IGCT/IGBT) to achieve precise switching operations and system protection.
Power Drive: Provides high-speed on/off pulses to reduce IGCT switching losses and improve inverter efficiency.
Protection mechanism: Integrated overcurrent, overvoltage, and undervoltage fault detection, supporting fast and safe shutdown (response time<1 μ s).
Interface compatibility: Communicate with the main controller (such as AC 800PEC) through optical fiber, supporting MODBUS or customized protocols.
Technical parameters:
Model: 3BHE03197R0001
Drive object: High voltage IGCT/IGBT module (such as 3BHB030310R0001)
Rated voltage: 4500V
Rated current: 4000A (depending on cooling conditions)
Peak pulse current: 1300A (8.3ms half wave)
Working temperature range: -40 ℃ to+125 ℃
Application scenarios: Rail transit (subway traction inverter), industrial drive (ACS6000 medium voltage inverter), renewable energy (wind power inverter).
3. 3BHB030310R0001: IGCT power module
Functional positioning:
As the control unit of the power grid circuit breaker, it manages the electrical connection between the power supply and the driving equipment, and achieves grid isolation during system startup, operation, and fault protection by controlling the closing and opening of the circuit breaker.
Power management: Control the connection or disconnection of power supply to protect the stable operation of the frequency converter system.
Fault protection: Implement remote control and abnormal disconnection protection of the main power supply, improve system reliability and maintenance efficiency.
Technical parameters:
Model: 3BHB030310R0001 (corresponding to IGCT module 5SHY4045L0006)
Function type: Power grid circuit breaker control, drive system power management
Control voltage: 24V DC (typical value)
Support communication: connected to ABB control boards (such as PMI, GVC, etc.), with status feedback function
System adaptation: commonly used in ABB ACS5000 and ACS6000 series frequency converter systems
Installation method: Modular design, can be integrated into cabinets or frequency conversion systems
Applicable voltage level: 6kV/11kV medium voltage system (depending on the overall configuration)
Application scenarios: High power motor control applications in industries such as mining, metallurgy, cement, and power plants.