Description
Many products are not yet available on the shelves. Please contact us for more information.
If the product model differs from the display picture, the model shown will prevail. Please contact us for specific product pictures, and we will arrange to take photos in the warehouse for confirmation.
We have 76 shared warehouses worldwide, so it may sometimes take several hours to get an accurate return. Please understand. Of course, we will respond to your concerns as soon as possible.
PSMU-350-3 Other Names:
Control Unit PSMU-350-3
PSMU-350-3 Input/Output Unit
Analog Unit PSMU-350-3
Product Positioning and Technology Type
Core Function: This high-efficiency power management module, manufactured by Compressor Control Corp (CCC), is specifically designed for industrial compressor control systems. It provides a stable DC power output, ensuring continuous and stable operation of the control module and related equipment under high loads, preventing voltage fluctuations from affecting equipment performance. The module employs high-efficiency energy conversion technology to reduce energy loss, improve energy efficiency, and lower operating costs.
Technical Architecture: Adopts a modular design, supports hot-swapping, and integrates overload protection, short-circuit protection, over-temperature protection, and voltage stabilization functions. Compatible with Modbus TCP/IP, RS-232/485, and other communication protocols, adaptable to industrial automation and distributed control systems.
Redundancy and Protection: Built-in overload protection, short-circuit protection, over-temperature protection, and grounding/leakage protection functions, compliant with IEC 61508/61511 SIL3 safety level certification, suitable for high-risk industries such as nuclear power and oil and gas. Explosion-proof scenarios require ATEX/NEPSI certification.
Core Technical Specifications
Electrical Parameters:
Input: Three-phase five-wire AC380V±10% 50Hz, supports 220V/400V AC three-phase power input.
Output: Stable DC power output, 350W power, 350A current protection range, voltage regulation accuracy up to 0.25% of FSR.
Protection Mechanisms: Built-in overload protection, short circuit protection, over-temperature protection, and over-range protection (150 VDC/115 VAC continuous over-range protection).
Physical Characteristics: Dimensions approximately 1200mm × 800mm × 1500mm, weight approximately 1.5kVA, operating temperature -10~50℃, storage temperature -40~85℃, protection rating IP20 (IP54 optional), meets EMC interference requirements.
Communication Interfaces: Supports Ethernet, serial port (RS-232/485), and industrial bus protocols; compatible with TriStation 1131 software; seamlessly integrates with Tricon series I/O modules.
Application Scenarios and Industry Adaptation:
Core Industrial Scenarios:
Compressor Control: Provides stable power support for air compressors and refrigeration units, ensuring continuous operation under high load conditions.
Process Control: In industries such as petrochemicals, power generation, and water treatment, it serves as a component of DCS/SIS systems, enabling real-time monitoring and regulation of parameters such as pressure, temperature, and flow rate.
Safety Systems: Integrated into Emergency Shutdown (ESD) and Fire and Gas Detection (F&G) systems, ensuring safe response to critical process parameters.
Special Scenarios:
Remote Monitoring: Supports expansion chassis for long-distance (e.g., within 12 kilometers) I/O module connections, suitable for distributed control systems.
Low-Voltage Intelligent Engineering: Used in projects such as the Shijie Town Central Kindergarten in Guangde City for network systems, conference systems, public address systems, and other low-voltage intelligent engineering projects, meeting network security and full video surveillance coverage requirements.
Safety Certification and Compliance:
International Certification: Passed IEC 61508/61511 functional safety certification, meeting SIL3 safety level, suitable for high-risk industries such as nuclear power and oil and gas. Explosion-proof scenarios require ATEX/NEPSI certification.
Installation and Maintenance
Installation Requirements:
Requires installation in a dedicated rack (e.g., Tricon 8008/8011), supports hot-swapping, and must be installed in an environment free from strong electromagnetic interference. Temperature/humidity must be controlled within specified ranges.
Mechanical keying slots must be designed to prevent misinsertion. Grounding resistance ≤1.0Ω, ensuring compliance with EMC protection specifications.
Maintenance Recommendations:
Regularly check input signal integrity. Use TriStation software for configuration and self-diagnosis. Perform no-load testing and protection setting verification every six months.
Follow SIL3 maintenance guidelines, including regular calibration (zero/range), spare parts management, and troubleshooting of cross-leg register faults.
Troubleshooting: Quickly locate problems using LED status indicators (e.g., RUN/READY/FAULT), and analyze potential faults using diagnostic software.
Potential Problems and Precautions
Common Problems: Intermittent cross-leg register faults (e.g., Register 0x79 test failure), but usually do not affect basic safety functions and can be troubleshooted using diagnostic tools. Extreme temperatures, high humidity, or corrosive gas environments should be avoided.
Selection and Verification: Purchase through official channels, confirming product model and certification scope consistency. Refer to the user manual and technical documents for configuration.
Summary: The PSMU-350-3 power management unit, with its high reliability, high-efficiency conversion, and multiple protection functions, has become a core power component for industrial compressor control systems and high-risk industries. Its modular design, flexible communication interfaces, and stringent international safety certifications ensure stable operation and rapid fault response in industries such as petrochemicals, power, and nuclear power, making it a preferred solution for industrial automation and safety instrumented systems. Users should select appropriate models and perform long-term maintenance according to specific application scenarios and SIL3 level maintenance specifications.
All products on this website are special products, and the market price has been fluctuating.
The specific quotation is subject to customer service, because the product is a new product and the price is not real.
Please confirm the model, product, price and other detailed information with customer service before placing an order. The website has been used.
New ones are on sale, please contact customer service for communication.
Related product recommendations:
B&R 5AC600.FLAP-K11
B&R 5AC600.GPIO-K03
B&R 5AC600.FLAP-K01
PPD115A02 3BHE017628R0002
PPD513AOC-100440 3BHE039724R0C3D
PPD539A102 3BHE039770R0102
PPD517A3011 3BHE041576R3011
PPD517A3011 3BHE041576R3011
PPD517 3BHE041576R3011
3BHE040375R103E PPD115
PPD539A102 3BHE039770R0102
3BHE057901R0101 PCD235
3BHE039724R0C3D PPD513AOC-100440
PCD235C101 3BHE057901R0101
GFD563A102 3BHE046836R0102
GFD233A101 3BHE022294R0101
GFD563A101 3BHE046836R0101
GFD563A102 3BHE046836R0102
GF D563 3BHE046836R010
PPD512 A10-15000 3BHE040375R1023
More……
admin –
https://www.weikunfadacai1.com/product/compressor-controls-ptm-psmu-350-3-power-module/
The CCC PSMU-350-3 is a multi-functional module for industrial automation, primarily used as a power management unit or control module. It is widely applied in compressor control systems, refrigeration and air conditioning, power equipment, and safety instrumented systems (SIS). Some sources mention that it may integrate frequency converters, three-phase contactors, or redundant control functions. It supports 220V/400V AC three-phase power input, with an output power of 350W and a rated current of 350A (some models). It features voltage regulation, current protection, and overload capability. It supports differential input, analog-to-digital conversion, and some configurations are compatible with Modbus TCP/IP, RS-232/485, and other protocols. It employs a triple modular redundancy (TMR) architecture, supports hot-swapping, and ensures that a single point of failure does not affect system safety.