Description

　　Many products are not yet listed. Please contact us for more product information.

　　If the product model differs from the displayed image, the model number shall prevail. Please contact us for specific product images; we will arrange to take photos in our warehouse for confirmation.

　　We have 76 shared warehouses worldwide, so it may sometimes take several hours to return an accurate answer to you. We apologize for the inconvenience. Of course, we will respond to your inquiries as soon as possible.

　　SCC-F 23212-0-120210000000 Other names:

Sample Gas Injection Device SCC-F 23212-0-120210000000

SCC-F 23212-0-120210000000 Gas Analyzer

Sample Gas Feeding Unit SCC-F 23212-0-120210000000

The SCC-F gas injection unit delivers sample gas to the analyzer and controls the flow rate and condensation in two independent gas paths. This unit connects to the controller board of the Advance Optima analyzer via a digital communication port to integrate status and alarm signals from sample processing.

Integrated sample gas regulator in a compact 1/2-19″ design

Complete sample gas pretreatment for use with the SCC-C sample gas cooler

Flow rate display and regulating rotor flow meter 10 to 100 Liters/hour, with needle valve (metal-free)

Easy to maintain due to module accessibility.

Six pneumatic versions available.

Two independent gas paths with an additional sampling pump.

Fully integrates into the AO2000 system via optional interface card.

　　Technical Specifications and Configuration

Sample Introduction System Design: Employs a high-precision syringe pump + autosampler combination, supporting ≥50 sample trays (volume ≥50mL), freely and randomly numbered, eliminating the need for fixed injection sequence. The injection tube is made of corrosion-resistant PTFE, and the injection needle is made of stainless steel, adaptable to complex sample environments.

Automation Functions: Automatically introduces gas to stir the sample, removing VOC interference and achieving homogenization of stratified samples; equipped with electronic pressure flow… Control system with automatic carrier gas flow compensation and correction; response time ≤ 1 second; pressure setting range 0-1035 kPa.

Accuracy and performance: Injection reproducibility ≤ 0.5%, linear correlation coefficient r ≥ 0.9995, detection limit ≤ 0.005 mg/L (sulfide determination scenario), dilution error ≤ 5% (maximum dilution factor 100 times).

Environmental adaptability: Operating temperature 15-35℃, humidity 20-80%, power supply 220V±10%, compatible with nitrogen, air, and other carrier gas systems, equipped with electronic pressure alarm function.

　　Application areas:

Industrial monitoring: Suitable for the analysis of pollutants such as sulfides, anionic surfactants, and volatile phenols in surface water, groundwater, and industrial wastewater, meeting HJ/T 200-2005 and GB/T standards. Complies with standards such as 7494-1987.

Energy and Chemical Industry: Natural gas component analysis (e.g., methane and nitrogen content determination), petrochemical equipment leak detection, oil and gas field environmental monitoring.

Scientific Research and Environmental Protection: Ambient air quality monitoring, gas analysis in hazardous waste treatment processes, automated sample processing in laboratories.

Special Scenarios: Explosion-proof versions are suitable for explosive gas/dust environments such as petrochemical and oil and gas fields (specific explosion-proof certification level needs to be confirmed).

　　Installation and Maintenance

Installation Requirements: Requires use with an ABB dedicated charge converter (e.g., IPC70x series) or V… The M600 system requires an installation torque of 15 N·m and must be secured with M6 screws and a matching spring lock washer.

Calibration and Maintenance: Factory dynamic calibration; no further periodic calibration is required. Regular inspection of the injection tubing, seals, and electronic pressure alarm system is recommended, along with replacement of consumables (such as injection tubing and exhaust gas absorption devices).

Troubleshooting: Automatic alarm and software lock in case of carrier gas system failure, saving measured data; supports remote monitoring and diagnostics, with a response time ≤24 hours.

　　Certifications and Standards:

Complies with international safety standards such as CE, EAC, and RoHS; ISO 9001 quality management system certified.

Meets GLP/GMP requirements, supporting event tracking, software validity verification, and safety management.

　　All products on this website are special products, and market prices are constantly fluctuating.

　　The specific price quoted by customer service will prevail, as the product is new and the price is not yet accurate.

　　Please confirm the model, product, price, and other detailed information with customer service before placing an order. This website is currently in use.

　　New products are available for sale; please contact customer service for further information.

Warehouse stock recommendation:
PFSK165
PFSK165 3BSE027778R1
PFSK110 
PFSK110 57310001-HG
PFSK108
PFSK108 YM322001-EH
PFSK106 YM322001-EC
PFSK111
PFSK111 5735175-C
PPD517A3011  3BHE041576R3011
PPD517A3011
PPD517  ABB
PPD517  3BHE041576R3011
PPD512A10-454000  3BHE040375R103E
3BHE040375R103E PPD115
PPD512A10-454000 |
PPD539A102  3BHE039770R0102
PPD539A102
More……