IS215UCVGM06A GE Board and Turbine Control Mark VI IS200

Sale!

IS215UCVGM06A GE Board and Turbine Control Mark VI IS200

¥6,252.00

Description


        IS215UCVGM06A – Standard Controller is available in stock which ships the same day.

  IS215UCVGM06A – Standard Controller comes in UNUSED as well as REBUILT condition.

  To avail our best deals for IS215UCVGM06A – Standard Controller, contact us and we will get back to you within 24 hours.


Product Description

The IS215UCVEM09B is featured in the Mark VI Speedtronic line by General Electric. The IS215UCVEM09B is a style of Ethernet connection circuit board. The IS215UCVEM09B uses jumper pins to create manual switches to direct energy flow. The faceplate of the IS215UCVEM09B features multiple ethernet ports along with other styled connection terminals. Each terminal is labeled with its purpose. Some of the terminals have extra places to secure the cables. The IS215UCVEM09B can use its resistors to get rid of the unwanted energy that the circuit board has accumulated. The IS215UCVEM09B has a large section of black lines that are used to cool the circuit board off. The IS215UCVEM09B has tower style condensers along with box style condensers. The condensers are used to create electrical energy fields. These electrical energy field house the electrical energy that the circuit board can use at a later time. The IS215UCVEM09B uses diodes along with the traces on the circuit boards surface to direct the flow of energy. The IS215UCVEM09B has several terminals that are used to connect the circuit board into place and allow for communication between circuit boards. The IS215UCVEM09B has a battery and an SD card. There is a small circuit board that is fastened from the faceplate to the center of the board. General Electric has produced various data sheets and instruction manuals to refer to. These include various procedures including safety protocol and insulation instructions and specifications on the circuit board.

IS215UCVGM06A IS215UCVGH1A VMIVME-7666-111000
FUNCTIONAL DESCRIPTION

IS215UCVGM06A is a standard controller manufactured and designed by General Electric. It is a single-slot board using a 300 MHz Intel Celeron processor with 16 MB of flash memory and 32 MB of DRAM. A single 10BaseT/100BaseTX (RJ-45) Ethernet port provides connectivity to the toolbox or to other control devices. The controller is installed on a Versa Modular Euro (VME) rack and communicates with I/O boards via the VME bus. Some board types also support local I/O via PCI Mezzanine Card (PMC) daughterboards. QNX, a real-time, multitasking OS designed for high-speed, high-reliability industrial applications, serves as the controller Operating System (OS). The Control System Toolbox is used to load software specific to the controller’s application (toolbox). Three communication ports allow access to the operator and engineering interfaces.


IS215UCVGM06A Operation

Software specific to the controller’s use with steam, gas, land-marine aeroderivative (LM), or balance of plant (BOP), products is put onto it. If the collection of blocks is normal and the blocks are of average size, it can execute up to 100,000 rungs or blocks every second.

The controller can synchronize to the clock on the VCMI communication board to within 100 microseconds with the aid of an external clock interrupt. The VCMI communication board uses the VME bus to send and receive external data to and from the control system database (CSDB) in the controller.

The process inputs and outputs from the I/O boards make up the data in a simplex system. The inputs from the input boards, singular inputs from simplex boards, computed outputs to be voted by the output hardware, and the internal state values that need to be exchanged between the controllers make up the data in a TMR system.


Features

The component is compatible with the Mark VI control system. It is a VME board with a single slot. The controller has two serial RS-232C ports, an Ethernet port, and connectors for a keyboard or mouse as well as a monitor. The board includes a high-speed processor, flash memory, and DRAM.

This board receives external data via the VCMI communications board. Depending on the system, data may be delivered to the board via process I/O (simplex) or voted I/O. (TMR.)

Product Components

Monitor port

Keyboard/mouse port

COM1 – RS-232C port for initial controller setup COM2 RS-232C port for Modbus serial communication

ETHERNET 1 – Primary Ethernet port for EGD communication and Toolbox configuration

Status LEDs – VMEbus SYSFAIL, Flash Activity, Power Status

Ethernet Status LEDs – Active (Blinking = Active), (Solid = Inactive), Link (Yellow = 10BaseT), (Green = 100BaseTX)

DLAN COM 20020 controller ARCNET interface

DLAN interface

COM 20020 ARCNET controller, BNC 93 ohm, transfer rate – 5 Mbps


Features

Bus Arbitration: The controller card manages bus access and arbitration among multiple modules connected to the VMEbus. It ensures that only one module has control of the bus at a given time.

Interrupt Handling: It supports interrupt requests from VMEbus devices and manages their priority and response. Interrupts are important for real-time applications that require immediate attention to certain events or data.

Data Transfer Control: Handles data transfers between the VMEbus and other devices, such as memory, input/output (I/O) devices, or other bus systems. It provides the necessary control signals and protocols for efficient and reliable data exchange.

Timing Generation: Generates timing signals required for the proper operation of the VMEbus. These signals include clock signals, bus cycle timing, and bus control signals.

Protocol Support: VME controller cards typically support various VMEbus protocols, such as VME64x, VME320, or VME64. These protocols define the electrical and logical specifications for data transfer, addressing, and timing on the VMEbus.

Backplane Connectivity: The controller card plugs into a VMEbus backplane, which serves as the physical connection between multiple modules in a computer system. The card is designed to fit into a specific VMEbus slot and connects to the backplane via edge connectors.


  Power requirements

+5 V dc, 6.6 A typical, 8.6 A maximum

+12 V dc, 180 mA typical, 250 mA maximum

-12 V dc, 180 mA typical, 250 mA maximum

Characteristics

Primary Ethernet interface: Twisted pair 10BaseT/100BaseTX, RJ-45 connector

Memory: 32 MB DRAM, 16 MB compact flash module, 128 KB L2 cache, Battery-backed SRAM

PROFIBUS interface: PROFIBUS DP master class 1

COM ports: Two micro-miniature 9-pin D connectors


  System Features

Small turbine speed control systems necessitate a simplified system architecture.

Simplex control is used to save money and space. Instead of the larger T-type terminal boards used on TMR systems, compact DIN-rail mounted terminal boards are available. Since the D-type terminal boards connect directly into the control chassis to interface with the I/O boards, IONet is not used.


  FREQUENTLY ASKED QUESTIONS

  What is IS215UCVGM06A ?

It is a standard controller manufactured and designed by General Electric.

  What type of connectivity does the UCVE provide?

The board provides a single 10BaseT/100BaseTX (RJ-45) Ethernet port for connectivity to the toolbox or other control devices.

  How is the configuration of the secondary Ethernet port performed?

Configuration of the secondary Ethernet port is performed through the toolbox.

  How does the controller validate its toolbox configuration?

The controller validates its toolbox configuration against the existing hardware each time the rack is powered up.

  Why does the controller need a separate subnet address?

A separate subnet address allows the controller to uniquely identify an Ethernet port.


All products on this website are special products, and market prices have been fluctuating,

  Please refer to the customer service quotation for details, as the product is new and the price is not genuine,

  Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,

  The new one is for sale, please contact customer service for further communication.


  Model recommendation:
IS215UCVEH2AB
IS215UCVEH2AE
IS215UCVEM08
IS215UCVEH2AE
IS215UCVEH2AF
IS215UCVEM01A
IS215UCVEM01A VMIVME350-017614-133E
IS215UCVEM01A VMIVME7614-133
IS215UCVEM01A IS215UCVEH2AF
IS215UCVEM01A IS215UCVEH2AF
IS200JPDSG1A
IS220PPDAH1A
IS210JPDHG1A
IS220YSILS1B
IS200SCSAS1A
IS200WCSAS1A
IS220YSILS1A
IS200TCSAS1A
IS200WNPSS1A
IS41yJPDDG2A
IS41yJPDDG3A
IS40yJPDGH1A
IS411JPDHG1A
IS4210UCSBH4A
more……

Reviews

There are no reviews yet.

Be the first to review “IS215UCVGM06A GE Board and Turbine Control Mark VI IS200”

Your email address will not be published. Required fields are marked *