SAIA PCD3.M5540Z05 CPU MODULE

Sale!

SAIA PCD3.M5540Z05 CPU MODULE

¥4,514.00

Description

Many products are not yet on the shelves please contact us for more products

  If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture, and we will arrange to take photos in the warehouse for confirmation

  We have 16 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course, we will respond to your concerns as soon as possible

Ethernet controller – VMIVME-7750 supports Ethernet LAN with two Intel Ethernet controllers (one 82559 and the other inside the Intel chipset ICH2). Supports 10BaseT and 100BaseTX option connectors through two RJ45. Support remote LAN boot. Remote Ethernet boot – VMIVME-7750 utilizes Lanworks Technologies, Inc.’s BootWare. BootWare provides remote access to the VMIVME-7750 network protocol using NetWare, TCP/IP, or RPL.

BootWare features: Support for NetWare, TCP/IP, and RPL network protocols ? Unmatched boot sector virus protection ? Detailed boot configuration screen ? Comprehensive diagnosis ? Optional disabling of local boot ? Dual boot option allows users to choose between network or local boot serial ports – two 16550 compatible serial ports are a feature on the front panel of VMIVME-7750. The serial channel has a 16 byte FIFO that supports up to 1.5 million bauds. Two micro-DB-9 to standard DB-9 adapters are required, VMIC P/N 360-010050-001. The keyboard and mouse port VMIVME-7750 has a PS/2 keyboard and mouse combination connector. Includes a Y-shaped adapter cable.(https://www.weikunfadacai1.com/)

 

Flash memory – VMIVME-7750 provides access through an auxiliary IDE port. The VMIVME-7750 BIOS includes an option to allow the board to boot from flash memory. TIMERS VMIVME-7750 provides users with two 16 bit timers and two 32-bit timers (in addition to the system timer). These timers are fully software programmable in the I/O space. Watchdog Timer – VMIVME-7750 provides software programmable watchdog timers. The watchdog timer is enabled under software control. The previous watchdog timer has been enabled, and the onboard software must access the timer within the specified timer cycle, or a timeout will occur. a. User jumper allows timeout, resulting in reset. Independent for jumpers, software can enable watchdog timeout causing non sliding interrupts (NMI) or VME bus SYSFAIL.(https://www.weikunfadacai1.com/)

Non volatile SRAM – VMIVME-7750 provides 32K bytes of non volatile SRAM. The content has been removed from the unit when the+5V power supply is interrupted. PMC Expansion Site – VMIVME-7750 supports IEEE P1386 Universal Mezzanine Card Specification with 5V PCI Mezzanine Card Expansion Site. PMC provides standard I/O for VMEbus front panel on site. An optional I/O connection for VMEbus P2 connection is available. For more information about PMC, please contact the VMIC module and compatibility.(https://www.weikunfadacai1.com/)

The Universal Serial Bus (USB) VMIVME-7750 provides a front panel dual hub USB host controller. The supported USB features include synchronous data transfer, asynchronous messaging, self identification and configuration of peripheral devices, and dynamic (hot) connections. VME bus interface – VMIVME-7750 VMEbus interface based on Universe IIB high-performance PCI to VME interface New Bridge/Tundra. System Controller – The onboard VMEbus system controller function allows the board to act as slot 1 controller, or when another board acts as the system controller. The system controller can be programmed to provide the following arbitration modes: Round Robin (RRS) Single Layer (SGL) Priority (PRI) The system controller provides SYSCLK drivers, IACK * daisy chain drivers, and VMEbus access timeout timers. The system controller also provides arbitration

If BBSY is not seen within the specified time thereafter, a BGOUT signal will be issued when timeout occurs. This cycle can be programmed for 16 or 256 μ s. VMEbus Request – The microprocessor can use any VMEbus to request and gain control request lines (BR3 * to BR0) to the bus.

 

This requester can be programmed in the following mode: Release After Request Release (ROR) (RWD) VMEbus Capture and Hold (BCAP) MAILBOX – The VMEbus interface provides four 32-bit mailboxes that can be expressed between the microprocessor and the processor provided by the VMEbus when accessing the microprocessor. INTERRupT HANDLER – Interrupt handler monitor that can be programmed to respond to any or all VMEbus IRQ * lines. All normal VMEbus related interrupts can be mapped to PCI INTA # or SERR # interrupts. This includes: mailbox interrupt VMEbus interrupt VMEbus interrupt IACK cycle (confirming VMIVME-7750 VME bus sends an interrupt) All error handling VMEbus related interrupts can be mapped to PCI INTA # or SERR #. Note: PCI SERR # starts SBC NMI. This includes:

The ACFAIL interrupt BERR interrupt SYSFAIL interrupt handler has corresponding STATUS/ID registers for each IRQ interrupt. Once the handler receives an IRQ, it requests VMEbus, and once approved, it executes the IACK loop at that level. Once the IACK loop is completed, the STATUS/ID is stored in the corresponding ID register, an appropriate interrupt status bit is set in the internal status register, and a PCI interrupt is generated. PCI interrupts can be mapped to PCI INTA # or SERR#

INTERRupTER – Interrupts can occur on any or all software control lines (IRQ7 * to IRQ1 *) of the seven VME bus interrupts. Associate a common ID register with all interrupt lines. During the interrupt confirmation cycle, the interrupt program sends the ID to the interrupt handler.

The interrupter can programmatically generate PCI. When the VMEbus interrupt handler is used, the INTA # or SERR # interrupt confirms the VMEbus interrupt generated by the software. Byte swapping – Intel 80×86 series processors use the little endian format. Accommodating other VMEbus modules that transmit data in big endian format as part of the 680×0 processor series, VMIVME-7750 includes byte switching hardware. This provides independent byte exchange interfaces for the master and slave devices. The byte exchange between the main interface and the slave interface is both under software control. VMIVME-7750 supports high throughput DMA Master and transfer slave configurations for medium byte, word, and long word transmissions. If endian conversion is not required, we provide a special “bypass” mode that can be used to further improve throughput. (Not applicable for byte transfer.) Main interface — MA32: MBLet32: MBLT64 (A32: A24: A16: D32: D16: D8 (EO): BLT32)

The VMEbus main interface provides nine independent memory windows to VMEbus resources. Each window is used to map PCI transfers to VMEbus (i.e. PCI base address, window size, VMEbus base address, VMEbus access type, VMEbus address/data size, etc.). The maximum/minimum window sizes for the nine windows are as follows:

 

Slave Interface – Memory Access SAD032: SD32: SBLT32: SBLT64 (A32: A24: A16: D32: D16: D8 (EO): BLT32) VMEbus Slave Interface provides eight independent memory windows for converting to PCI resources. Each window has a separate configuration register for mapping VMEbus transmission to the PCI bus (i.e. VMEbus base address, window size, PCI base address, VMEbus access type, VMEbus address/data size, etc.). The maximum/minimum window size for eight windows is as follows: Use write to post FIFO and/or read to prefetch FIFO to improve system performance. In coupling mode, bypassing FIFOs, VMEbus transactions are directly coupled to the PCI bus (meaning that transfers on VMEbus are not completed until they are completed on the PCI bus). Enhanced bus error handling – The enhanced feature of Universal chip bus error handling provides features. Provide latches and registers to allow SBC to read causing bus errors in all modes. The Universal chip supports limited decoupling modes. Provides support for bus cycle timeouts and bus error assertions. The board can be configured to assert bus errors regardless of its status as a system controller. This only asserts bus errors when the Universe chip is the system controller. In addition, this board can be configured to assert interrupts during bus cycle timeouts.

The operating system and software SUPERT-VMIVME-7750 provide features beyond embedded PC/AT functionality. These features are supported by VMIC software products aimed at developers who are currently merging VMIC SBC, I/O boards, and workstations into the system. Windows NT/Windows 2000 and VxWorks are the most common supported operating systems through VMIC software products. Windows NT/Windows 2000- IOWorks ? A software family is a set of working software components that together or individually provide an environment/Windows 2000 operating system for the comprehensive development of any application in Windows NT. VMISFT-9420 VME bus access ? For Windows NT/Windows 2000- VMEbus access, this product is specifically designed to access the advanced VMIVME-7750 VMEbus access architecture. Running on Windows NT/Windows 2000, VMEbus Access is both complex and easy to use. The function library, VMEbus toolset, and open architecture provided by VMEbus Access make it a powerful product in today’s market. It provides compatibility with existing VMIC VMEbus PC platforms and compatibility with future VMEbus PC platforms for VMIC creation. The VMEbus Access development package provides you with all the necessary operations to develop applications for VME. This software package includes VMEmanager ? The function library and four utilities allow you to easily configure VMEbus, dynamically monitor VMEbus activity, manage VMEbus data, and use DDE client applications.

VMEbus Access is used to develop, debug, and monitor applications for VMEbus and improve its performance. The flexible design of this VMEbus Access allows you to merge it as a standalone solution or use it to open VMEbus operations to the IOWorks product suite. VMEbus Access manipulation scenario. With VMEbus Access, you can develop applications in or use them in most programming environments. For example。

Model recommendation:
WATLOW ANAFAZE CLS200 2040-6856

PM856AK01 processing module

ABB PM856AK01 3BSE066490R1

ABB controller module PM856K01

3 reviews for SAIA PCD3.M5540Z05 CPU MODULE

  1. Avatar

    Quincy Alicia

    Some really excellent information, Sword lily I noticed this.

  2. Avatar

    Peter Hayakawa

    Excellent post. I used to be checking constantly this weblog and I’m impressed! Very helpful info specially the final part 🙂 I maintain such info a lot. I used to be seeking this particular info for a long time. Thank you and best of luck.

  3. Avatar

    Ricardo Bidlack

    I really like your writing style, fantastic information, thankyou for posting : D.

Add a review

Your email address will not be published. Required fields are marked *