Description

---

　　Many products are not yet listed. Please contact us for more product information.

　　If the product model differs from the displayed image, the model number shall prevail. Please contact us for specific product images; we will arrange to take photos in our warehouse for confirmation.

　　We have 76 shared warehouses worldwide, so it may sometimes take several hours to accurately return the information to you. We apologize for the inconvenience. Of course, we will respond to your inquiries as soon as possible.

---

8440-1878 Other Names:

Redundant Protector 8440-1878

8440-1878  Communication Controller

Input/Output Unit 8440-1878

Function Integration: As a parallel generator set controller, it integrates complete generator control, protection, parallel synchronization, and remote monitoring functions. It supports load sharing for up to 32 generator sets and is suitable for emergency backup, distributed generation, microgrids, cogeneration, and other scenarios.

Input/Output Capabilities: Supports true RMS voltage (generator/bus/main power) and current detection, compatible with SAE-J1939 and proprietary engine protocols, and communicates with the engine ECU via a CAN network. Equipped with a serial Modbus RTU (slave) interface, supporting SCADA system alarms and external control.

Protection and Redundancy: Integrates fully programmable protection functions for the engine and generator, supporting proportional load sharing (isochronous or droop mode) for up to 32 generator sets, independent of individual unit capacity. Features automatic synchronization, phase matching, frequency sliding control, and circuit breaker closing/opening control functions.

Communication and Expansion: Connects to the RP-3500 remote panel via the CANopen protocol, enabling remote alarm, control, and configuration up to 250 meters. Supports LogicsManager™ programmable logic, allowing for flexible application integration without an additional PLC.

Environmental Adaptability: Complies with CE, UL/cUL, CSA, BDEW, ABS, Lloyd’s Register certification standards, and meets international standards such as ISO 8528 and IEC 60034. Protection ratings range from IP20 to IP67 depending on the application scenario, with electromagnetic interference (EMC) immunity and an operating temperature range of -20℃ to 60℃.

Core Parameters and Technical Characteristics

Signal Processing Capabilities: Supports dual-mode input of current (4-20mA) and voltage (0-5/10V), employing true RMS detection technology to reduce harmonic interference; 12-bit resolution, sampling period as low as 50ms.

Parallel and Islanded Operation: Supports peer-to-peer parallel operation, mains parallel operation, multiple mains parallel operation, and islanded mode, suitable for distributed generation, microgrids, and combined heat and power (CHP) scenarios.

Communication and Integration:

Built-in CAN network interface, supporting SAE-J1939 protocol and engine OEM proprietary protocol, enabling real-time communication with the engine ECU.

Supports Modbus RTU slave communication, allowing integration with SCADA systems or PLCs for remote monitoring and control.

Remote configuration and operation up to 250 meters via the RP-3500 remote panel (CANopen protocol).

Functional Expansion: Integrates LogicsManager™ programmable logic functions, supporting custom control logic and reducing the need for additional PLCs; supports parallel load sharing and synchronous control of up to 32 generator sets.

Safety and Certification: Complies with SIL 3 (IEC 61508/62061) and AK6 certification standards, and has passed multiple international certifications including CE, UL/cUL, CSA, BDEW, ABS, and Lloyd’s Register, ensuring reliability in high-safety scenarios such as petrochemicals, power, and rail transportation.

Application Scenarios:

Emergency Backup Power: Used for automatic mains fault detection and rapid switching in data centers, hospitals, and industrial facilities, ensuring continuous power supply to critical equipment.

Distributed Generation and Microgrids: Supports utility grid connection, peak shaving and valley filling, and demand response; suitable for remote areas, offshore platforms, mobile equipment, and other scenarios.

Combined Heat and Power (CHP): Achieves efficient energy conversion and control in wastewater treatment and biogas power generation, improving overall system efficiency.

Cyclic Heat and Power (CHP) Microgrids and Cogeneration: Energy management for universities, net-zero communities, and wastewater treatment plants, combining biogas/biomass energy for efficient power generation and heating.

Isolated Power Supply and Rental Equipment: Providing independent power supply solutions for oil exploration and remote villages, supporting asynchronous generator control and asymmetrical load management.

Installation and Maintenance Specifications

Installation Requirements:

Configuration must be performed using Woodward ToolKit software via PC/laptop, ensuring firmware compatibility with the system OS version.

Rack-mount installation supports up to 1472 I/O points; module firmware version must be verified to be consistent with the system.

Follow anti-static operating procedures to avoid damage to components due to ungrounded plugging and unplugging.

Electrical Safety: IP rating must be compatible with the environment (e.g., IP23 for units below 10kW), and the grounding system must comply with EN 60204-1 to prevent direct/indirect electric shock.

Maintenance Operations:

Clean terminal contacts (anhydrous ethanol) every 6 months, and trigger a self-test command monthly to verify AD linearity.

The battery (e.g., CR2477N) has a lifespan of approximately 6 years. Replacement must be completed within the redundancy protection window to avoid single-point failure risks.

Fault diagnosis tools (e.g., HIMA DiagTools) can parse diagnostic codes and provide cloud-based lifespan prediction with 30-day advance warning of capacitor degradation.

Fault Handling:

Idle channels must be terminated with jumpers (voltage input to 0.5V, current input to a shunt) to prevent false alarms due to floating signals.

Do not connect non-equivalent modules in series; output voltage tolerance must be ≤±2%.

Firmware and Configuration: Configuration updates are performed using the Woodward ToolKit service tool, enabling remote diagnostics in conjunction with the RP-3500 remote panel.

Fault Handling: Idle channels must be terminated with jumpers (voltage to 0.5V, current to a shunt) to prevent false alarms due to floating signals. The battery (e.g., CR2477N) has a lifespan of approximately 6 years. Replacement must be completed within the redundancy protection window.

Industry Advantages and Certifications

High Safety: TÜV SIL3/AK6 certified, with a PFD (Probability of Hazardous Failure) as low as 10⁻⁷, meeting the “zero tolerance” safety requirements of nuclear power, chemical industry, and other sectors.

Flexibility and Expandability: Supports hot-swapping, avoiding production line downtime losses; central module battery replacement follows the standard of “vertical removal of the ejector lever → battery replacement → ACK button reset,” ensuring system continuity.

Environmental Adaptability: Operating temperature -20℃ to 60℃, protection rating IP20/IP54 (some versions IP67), electromagnetic interference (EMC) resistant, passed a 1-meter concrete drop test, suitable for extreme industrial environments.

Typical Application Cases

Petrochemical Industry: Reduces signal false alarm downtime by 70% in oil refineries, improving production efficiency.

Power Energy: Achieves millisecond-level fault location and isolation in substations, ensuring stable grid operation.

Rail Transit: Used in Automatic Train Control (ATS) systems to ensure precise execution of turnout switching and signal displays, preventing signal interruptions due to single-point failures.

Summary: The Woodward EASYGEN-3500-5 series controller, with its high-precision control, strong redundancy design, wide compatibility, and stringent safety certifications, has become a benchmark product in the field of industrial generator set control, especially suitable for complex scenarios requiring high reliability, remote monitoring, and multi-unit coordination. Its standardized installation and maintenance procedures are key to ensuring long-term stable system operation.

---

　　All products on this website are special products, and market prices are constantly fluctuating.

　　Please refer to customer service for a quote, as the product is new and the price is not yet accurate.

　　Please confirm the model, product, price, and other detailed information with customer service before placing an order. This website is currently in use.

　　New products are available for sale; please contact customer service for further information.

---

Model recommendation:
EASYGEN 3500XT 8440-2085
8440-1800
8440-1925
8440-1934
8440-1546
8440-1894
8440-2096
8440-2077
WOODWARD 8440-1809
8440-2050
8440-1878
8440-2050
9907-1228-CPC
9907-205
9907-018
9907-163
9907-163
9907-175
9907-149
9907-162 
9907-164
9907-165 
5466-409
5448-890
8440-2047
SPM-D11 8440-1703
SPM-D11 8440-1706
5463-375
 5463-384
8271-147 
8271-872
5463-397
More……